Establishing Connections
Page 94 7450 ESS-7
EJECTING FLASH CARDS
To eject the slot #3 flash card:
Step 1 The shutdown command MUST be issued prior to removing a flash card.
Command Example
file shutdown cflash-id ALA-7# file shutdown cf3:
Step 1
Loosen the compact flash slot locking screw.
Step 2 Lift the slot cover.
Step 3 The ejector button for Compact Flash Slot #3 is slightly recessed. Insert a small object
such as a pen tip to depress the button. The card will partially pop out of the slot.
Step 4 Remove the card and place it in an anti-static bag.
The flash card containing the boot and configuration files must be installed in Compact
Flash Slot #3 (
cf3:) on the SF/CPM card.
Step 5 Lower the slot cover and tighten the locking screw.
To eject the slot #1 or slot #2 flash cards:
Step 1 The shutdown command MUST be issued prior to removing a flash card.
Command Example
file>shutdown cflash-id ALA-7# file shutdown cf1:
file>shutdown cflash-id ALA-7# file shutdown cf2:
Step 2
Press the ejector button on compact flash slot #1 or compact flash slot #2. The card will
partially pop out of the slot.
Step 3 Remove the card and place it in an anti-static bag.
To Next Page
Loading...
