Alcatel-Lucent 7450 ESS-7 - Page 112

Root Commands
7450 ESS OS Basic System Configuration Guide Page 131
Received : Pkts - 0 Octets - 0
===============================================================================
A:ALA-12>monitor>router>mpls#
lsp-egress-statistics
Syntax lsp-egress-stats lsp-name [interval seconds] [repeat repeat] [absolute | rate]
Context monitor>router>mpls
Description This command displays egress statistics for LSP interfaces at the configured interval until the configured
count is reached.
Default no lsp-egress-statistics
Parameters repeat repeat — Specifies how many times the command is repeated.
Values 10
Values 1 — 999
interval seconds — Specifies the interval for each display, in seconds.
Values 10
Values 3 — 60
absolute — When the absolute keyword is specified, the raw statistics are displayed, without processing.
No calculations are performed on the delta or rate statistics.
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed instead of the
delta.
Sample
B:Dut-C-cpm2# monitor router mpls lsp-egress-stats sample repeat 3 interval 10 absolute
===============================================================================
Monitor egress statistics for MPLS LSP "sample"
-------------------------------------------------------------------------------
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
LSP Name : sample
-------------------------------------------------------------------------------
Collect Stats : Enabled Accting Plcy. : 5
Adm State : Up PSB Match : True
FC BE
InProf Pkts : 0 OutProf Pkts : 551
InProf Octets : 0 OutProf Octets: 560918
FC L2
InProf Pkts : 0 OutProf Pkts : 551
InProf Octets : 0 OutProf Octets: 560918
FC AF
InProf Pkts : 551 OutProf Pkts : 0
InProf Octets : 560918 OutProf Octets: 0
FC L1
InProf Pkts : 551 OutProf Pkts : 0
InProf Octets : 560918 OutProf Octets: 0
FC H2