Alcatel-Lucent 7450 ESS-7 - Table 36: Chassis Mode Behavior

System Management
7450 ESS OS Basic System Configuration Guide Page 315
— keep-alive-interval interval
— no keep-alive-interval
— [no] mc-endpoint
— [no] bfd-enable
— boot-timer interval
— no boot-timer
— hold-on-neighbor-failure multiplier
— no hold-on-neighbor-failure
— keep-alive-interval interval
— no keep-alive-interval
— [no] passive-mode
— [no] shutdown
— system-priority value
—no system-priority
— [no] mc-lag
— hold-on-neighbor-failure multiplier
—no hold-on-neighbor-failure
— keep-alive-interval interval
—no keep-alive-interval
— lag lag-id lacp-key admin-key system-id system-id [remote-lag lag-
id] system-priority system-priority
— no lag lag-id
— [no]
shutdown
— mc-ring
— ring sync-tag [create]
—no ring sync-tag
— in-band-control-path
— dst-ip ip-address
—no dst-ip
— interface ip-int-name
—no interface
— service-id service-id
—no service-id
— [no] path-b
— [no] range vlan-range
— [no] path-excl
— [no] range vlan-range
— ring-node ring-node-name [create]
—no ring-node ring-node-name
— connectivity-verify
— dst-ip ip-address
—no dst-ip
— interval interval
—no interval
— service-id service-id
—no service-id
— [no] shutdown
— src-ip ip-address
—no src-ip
— src-mac ieee-address
—no src-mac
— vlan [0..4094]
—no vlan
— [no] shutdown
— peer-name name