Alcatel-Lucent 7450 ESS-7 - Contact; Name; System Information Parameters

System Management
7450 ESS OS Basic System Configuration Guide Page 253
System Information Parameters
Name
Use the system command to configure a name for the device. The name is used in the prompt
string. Only one system name can be configured, if multiple system names are configured the last
one encountered overwrites the previous entry. Use the following CLI syntax to configure the
system name:
CLI Syntax: config>system
name system-name
Example
: alcatel>config>system# name ALA-12
The following example displays the system name:
sysName@domain>config>system# info
#------------------------------------------
echo "System Configuration "
#------------------------------------------
name "ALA-12"
. . .
exit
----------------------------------------------
sysName@domain>config>system#
Contact
Use the contact command to specify the name of a system administrator, IT staff member, or
other administrative entity.
CLI Syntax: config>system
contact contact-name
Example
: config>system# contact “Fred Information Technology”