Alcatel-Lucent 7450 ESS-7 - Page 205

Page 198 7450 ESS OS Basic System Configuration Guide
duplex
Syntax duplex {full | half}
Context bof
Description
This command configures the duplex mode of the
CPM management Ethernet port when autonegotiation is
disabled in the running configuration and the Boot Option File (BOF).
This configuration command allows for the configuration of the duplex mode of the
CPM Ethernet
interface. If the port is configured to autonegotiate this parameter will be ignored.
Default duplex full — Full duplex operation.
Parameters full — Sets the link to full duplex mode.
half — Sets the link to half duplex mode.
li-local-save
Syntax [no] li-local-save
Context bof
Description This command enables the lawful intercept (LI) configuration to be saved locally.
li-separate
Syntax [no] li-separate
Context bof
Description This command enables separate access to lawful intercept (LI) information.
speed
Syntax speed speed
Context bof
Description
This command configures the speed for the
CPM management Ethernet port when autonegotiation is
disabled in the running configuration and the Boot Option File (BOF).
If the port is configured to autonegotiate this parameter is ignored.
Default speed 100 — 100 M/bps operation.
Parameters 10 — Sets the link to 10 M/bps speed.
100 — Sets the link to 100 M/bps speed.