Alcatel-Lucent 7450 ESS-7 - Page 208

Boot Option Files
7450 ESS OS Basic System Configuration Guide Page 201
DNS name resolution can be used when executing ping, traceroute, and service-ping, and also when
defining file URLs. DNS name resolution is not supported when DNS names are embedded in configuration
files.
The no form of the command removes the secondary DNS server from the configuration.
Default no secondary-dns — No secondary DNS server is configured.
Parameters ip-address — The IP address of the secondary DNS server.
Values ipv4-address - a.b.c.d
tertiary-dns
Syntax [no] tertiary-dns ip-address
Context bof
Description This command configures the tertiary DNS server for DNS name resolution. The tertiary DNS server is used
only if the primary DNS server and the secondary DNS server do not respond.
DNS name resolution can be used when executing ping, traceroute, and service-ping, and also when
defining file URLs. DNS name resolution is not supported when DNS names are embedded in configuration
files.
The no form of the command removes the tertiary DNS server from the configuration.
Default no tertiary-dns — No tertiary DNS server is configured.
Parameters ip-address — The IP or IPv6 address of the tertiary DNS server.
Values ipv4-address - a.b.c.d
ipv6-address: x:x:x:x:x:x:x:x[-interface]
x:x:x:x:x:x:d.d.d.d[-interface]
x: [0..FFFF]H
d: [0..255]D
interface - 32 chars max, for link local addresses