Page 366 7450 ESS OS Basic System Configuration Guide
scheduler-policy
Syntax [no] scheduler-policy scheduler-policy-name [time-range time-range-name] [priority priority]
Context config>cron>tod-suite>egress
config>cron>tod-suite>ingress
Description This command creates time-range based associations of previously created scheduler policies. Multiple
policies may be included and each must be assigned a different priority; in case time-ranges overlap, the
priority will be used to determine the prevailing policy. Only a single reference to a policy may be included
without a time-range.
Parameters scheduler-policy-name — Specifies a scheduler policy for this tod-suite.
Values Up to 32 characters
time-range time-range-name — Specifies the name for a time-range. If the time-range is not populated the
system will assume the assignment to mean “all times”. Only one entry without a time-range is allowed
for every type of policy. The system does not allow the user to specify more than one policy and the
same time-range and priority.
Values Up to 32 characters
priority priority — Specifies the time-range priority. Only one time-range assignment of the same type and
priority is allowed.
Values 1 — 10
To Next Page
Loading...
