System Management
7450 ESS OS Basic System Configuration Guide Page 387
location
Syntax location [cf1: | cf2: | cf3:]
no location
Context config>system>persistence>sub-mgmt
config>system>persistence>dhcp-server
Description This command instructs the system where to write the file. The name of the file is: dhcp-persistence.db. On
boot the system scans the file systems looking for dhcp-persistence.db, if it finds it starts to load it.
In the subscriber management context, the location specifies the flash device on a CPM card where the data
for handling subscriber management persistency is stored.
The no form of this command returns the system to the default. If there is a change in file location while
persistence is running, a new file will be written on the new flash, and then the old file will be removed.
Default no location
To Next Page
Loading...
