Alcatel-Lucent 7450 ESS-7 - Page 504

Page 466 7450 ESS OS Basic System Configuration Guide
-------------------------------------------------------------------------------
Application : igmpSnooping
Num Entries : 0
Lcl Deleted Entries : 0
Alarm Entries : 0
-------------------------------------------------------------------------------
Rem Num Entries : 0
Rem Lcl Deleted Entries : 0
Rem Alarm Entries : 0
-------------------------------------------------------------------------------
Application : subMgmt
Num Entries : 1
Lcl Deleted Entries : 0
Alarm Entries : 0
-------------------------------------------------------------------------------
Rem Num Entries : 1
Rem Lcl Deleted Entries : 0
Rem Alarm Entries : 0
-------------------------------------------------------------------------------
Application : srrp
Num Entries : 0
Lcl Deleted Entries : 0
Alarm Entries : 0
-------------------------------------------------------------------------------
Rem Num Entries : 0
Rem Lcl Deleted Entries : 0
Rem Alarm Entries : 0
===============================================================================
*A:subscr_mgt_2#
detail
Syntax detail
Context show>redundancy>multi-chassis>peer
Description This command displays detailed peer information.
Output Show Redundancy Multi-chassis Sync Peer Detail Output — The following table describes show
redundancy multi-chassis sync detail output fields:
Table 32: Show Redundancy Multi-chassis Sync Peer Detail Output Fields
Label Description
Peer IP Address
Displays the multi-chassis redundancy peer.
Description
The text string describing the peer.
Authentication
If configured, displays the authentication key used between this node and the
multi-chassis peer.