Alcatel-Lucent 7450 ESS-7 - Page 516

Page 478 7450 ESS OS Basic System Configuration Guide
Syntax synchronization
Context show>redundancy>synchronization
Description This command displays redundancy synchronization times.
Output Synchronization Output — The following table describes redundancy synchronization output fields.
Sample Output
A:ALA-1>show>redundancy# synchronization
===============================================================================
Synchronization Information
===============================================================================
Standby Status : disabled
Last Standby Failure : N/A
Standby Up Time : N/A
Failover Time : N/A
Failover Reason : N/A
Boot/Config Sync Mode : None
Boot/Config Sync Status : No synchronization
Last Config File Sync Time : Never
Table 36: Show Synchronization Output Fields
Label Description
Standby Status Displays the status of the standby CPM.
Last Standby
Failure
Displays the timestamp of the last standby failure.
Standby Up Time
Displays the length of time the standby CPM
has been up.
Failover Time Displays the timestamp when the last redundancy failover occurred
causing a switchover from active to standby CPM. If there is no redun-
dant CPM card in this system or no failover has occurred since the sys-
tem last booted, the value will be 0.
Failover Reason Displays a text string giving an explanation of the cause of the last
redundancy failover. If no failover has occurred, an empty string dis-
plays.
Boot/Config Sync
Mode
Displays the type of synchronization operation to perform between the
primary and secondary CPMs after a change has been made to the con-
figuration files or the boot environment information contained in the
boot options file (BOF).
Boot/Config Sync
Status
Displays the results of the last synchronization operation between the
primary and secondary CPMs.
Last Config File
Sync Time
Displays the timestamp of the last successful synchronization of the
configuration files.
Last Boot Env
Sync Time
Displays the timestamp of the last successful synchronization of the
boot environment files.