Page 92 7450 ESS OS Basic System Configuration Guide
<< — Stdin can be used as the source of commands for the exec command. When stdin is used as the exec
command input, the command list is terminated with <Ctrl-C>, “EOF<Return>” or
“eof_string<Return>”.
If an error occurs entering an exec file sourced from stdin, all commands after the command returning
the error will be silently ignored. The exec command will indicate the command error line number
when the stdin input is terminated with an end-of-file input.
eof_string — The ASCII printable string used to indicate the end of the exec file when stdin is used as the
exec file source. <Ctrl-C> and “EOF” can always be used to terminate an exec file sourced from stdin.
Default <Ctrl-C>, EOF
Related
Commands
boot-bad-exec command on page 321 — Use this command to configure a URL for a CLI script to exec
following a failed configuration boot.
boot-good-exec command on page 321 — Use this command to configure a URL for a CLI script to exec
following a successful configuration boot.
exit
Syntax exit [all]
Context <GLOBAL>
Description This command returns to the context from which the current level was entered. For example, if you navi-
gated to the current level on a context by context basis, then the exit command only moves the cursor back
one level.
A:ALA-1# configure
A:ALA-1>config# router
A:ALA-1>config>router# ospf
A:ALA-1>config>router>ospf# exit
A:ALA-1>config>router# exit
A:ALA-1>config# exit
If you navigated to the current level by entering a command string, then the exit command returns the cursor
to the context in which the command was initially entered.
A:ALA-1# configure router ospf
A:ALA-1>config>router>ospf# exit
A:ALA-1#
The exit all command moves the cursor all the way back to the root level.
A:ALA-1# configure
A:ALA-1>config# router
A:ALA-1>config>router# ospf
A:ALA-1>config>router>ospf# exit all
A:ALA-1#
Parameters
all — Exits back to the root CLI context.
To Next Page
Loading...
