Alcatel-Lucent 7450 ESS-7 - Page 76

Root Commands
7450 ESS OS Basic System Configuration Guide Page 95
93 card-type
94 exit
95 router
96 exit
97 history
A:ALA-1# !91
A:ALA-1# configure
A:ALA-1>config#
info
Syntax info [detail]
Context <GLOBAL>
Description This command displays the running configuration for the configuration context.
The output of this command is similar to the output of a show config command. This command, however,
lists the configuration of the context where it is entered and all branches below that context level.
By default, the command only enters the configuration parameters that vary from the default values. The
detail keyword causes all configuration parameters to be displayed.
For example,
A:ALA-48>config>router>mpls# info
----------------------------------------------
admin-group "green" 15
admin-group "red" 25
admin-group "yellow" 20
interface "system"
exit
interface "to-104"
admin-group "green"
admin-group "red"
admin-group "yellow"
label-map 35
swap 36 nexthop 10.10.10.91
no shutdown
exit
exit
path "secondary-path"
hop 1 10.10.0.111 strict
hop 2 10.10.0.222 strict
hop 3 10.10.0.123 strict
no shutdown
exit
path "to-NYC"
hop 1 10.10.10.104 strict
hop 2 10.10.0.210 strict
no shutdown
exit
path "to-104"
no shutdown
exit
lsp "to-104"
to 10.10.10.104
from 10.10.10.103
rsvp-resv-style ff