Alcatel-Lucent 7450 ESS-7 - Page 96

Root Commands
7450 ESS OS Basic System Configuration Guide Page 115
ip
Syntax ip entry entry-id [interval seconds] [repeat repeat] [absolute | rate]
Context monitor>management-access-filter
Description This command nonitors statistics for the MAF IP filter entry.
Parameters entry entry-id — Specifies an existing IP MAF entry ID.
Values 1 — 9999
interval seconds — Configures the interval for each display in seconds.
Default 10
Values 3 — 60
repeat repeat — Configures how many times the command is repeated.
Default 10
Values 1 — 999
absolute — When the absolute keyword is specified, the raw statistics are displayed, without processing.
No calculations are performed on the delta or rate statistics.
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed instead of the
delta.
mac
Syntax mac entry-id [interval seconds] [repeat repeat] [absolute | rate]
Context monitor>management-access-filter
Description This command nonitors statistics for the MAF MAC filter entry.
Parameters entry entry-id — Specifies an existing IP MAF entry ID.
Values 1 — 9999
interval seconds — Configures the interval for each display in seconds.
Default 10
Values 3 — 60
repeat repeat — Configures how many times the command is repeated.
Default 10
Values 1 — 999
absolute — When the absolute keyword is specified, the raw statistics are displayed, without processing.
No calculations are performed on the delta or rate statistics.
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed instead of the
delta.