2.9 Requesting automatic callback if internal number is busy
Internalnumberbusy
Call back Callback request acknowledged
Automatic callback is not available if the set of your caller is free or if you are put on hold when the
set is busy
2.10 Cancelling an automatic callback
When your phone rings
Call back Cancellation of callback request acknowledged
Canceling the callback request is only possible when the caller you tried to reach released the line.
2.11 Receiving intercom calls
You can answer a call without lifting the receiver. When you receive a call, you are automatically
connected in hands-free mode. The identity of the caller is displayed on the screen.
To activate -Terminal idle:
Corresponding LED lights up
When your caller hangs up, interphony mode remains active.
To deactivate -Terminal idle:
The corresponding LED goes out
2.12 Sending DTMF signals
During a conversation you sometimes have to send DTMF signals, such as with a voice server, an
automated attendant or a remotely consulted answering machine.
By default during a communication, your telephone is configured to send codes in voice frequency:
enter these codes directly using the keys on your telephone. For more information regarding this
configuration, contact the person in charge of your installation.
During a conversation
Enter DTMF code
2.13 Mute, so that your caller cannot hear you
You can hear your caller but he/she cannot hear you:
From the set
During a conversation
Disable microphone The key lights up
Resume the conversation The key is no longer lit
From the Bluetooth® receiver
Press the handset volume/mute key (long press)
To Next Page
Loading...
