2.3 Making a call
Use one of the following:
• Dial the destination number. The hands-free mode is activated automatically.
• Unhook the handset Dial the destination number.
• Press the Off-hook key of the headset Dial the destination number. If your headset has no Off-
hook/On-hook key, use the phone keys and switch on the audio on the headset ( ).
• Hands-free Dial the destination number.
• Programmed line key.
• Dial by name (enter the first letters of the contact's name on the alphapad and press OK to start
the search).
• Redialing from the call log.
• Redial last number.
To make an external call, dial the outside line access code before dialing your contact number.
If the internal or outside number does not reply
• LS announce Broadcast a message on the loudspeaker of the free terminal.
• Call back Request callback to a busy terminal.
• Text mail Send a written message.
• Voice mail Store number to call again.
The hands-free mode can be deactivated by the administrator.
2.4 Receiving a call
Answer the call depends on audio devices connected to you phone: handset, headset, hands-free,
external hands-free or loudspeaker.
Use one of the following:
• Lift the handset to take the call.
• Press the On-Hook/Off-Hook key on the headset to take the call. If your headset has no Off-
hook/On-hook key, use the phone keys and switch on the audio on the headset ( ).
• or Press the 'take the call', 'loudspeaker' key to take the call in hands-free mode.
• Take call or Take the call with the headset if connected, or in hands-free mode.
• Select the incoming call icon.
• Press dedicated line key on external handsfree to take the call in hands-free mode on this device.
The hands-free mode can be deactivated by the administrator.
To Next Page
Loading...
