3.8 Placing an outside call on hold (parking)
You can place an outside call on hold and recover the call on another telephone:
• During a conversation.
• Park the call
• Enter the number of the parking destination phone.
Retrieve the call from the parking destination phone:
• Reach the 'Menu' page.
• Settings My services Consult Call pick up services Park/retrieve call
Retrieve the call from another phone:
• Reach the 'Menu' page.
• Settings My services Consult Call pick up services Park/retrieve call
• Enter the number of the parking destination phone.
This feature is accessible via a programmed key.
•
If the parked call is not recovered within a preset time (default value 1 min 30), it is transferred to the
operator.
3.9 Intrusion into an internal conversation (barge-in)
Your contact's line is busy. If the number is not 'protected' and if authorised, you can intrude into the call:
• Intrusion
• Same key to exit (Intrusion).
3.9.1 Protect a call against intrusion
• Press programmed key. The programmed key has to be configured by the system: No intrusion
(No intrud) (by default).
• Enter contact's number.
Protection is cancelled when you hang up.
3.10 Signal malicious calls
This key lets you signal a malicious call. If this call has an internal source, it is signalled to the system by
a special message.
• You receive a malicious call.
• Malicious
To Next Page
Loading...
