Alcatel-Lucent 8039 - Exit Time; Vat Rate; Client Record Screens

8AL90302ENAAed01
21 /26
5.9 Exit time
The reception terminal automatically exits the Hotel application and switches to standby if no operation is
carried out for a programmed length of time:
 Hotel (Hotel programmed key).
 DefaultValue.
 ExitTime.
 Time (in minutes).
 Validate.
5.10 VAT rate
This feature is used to enter the country's VAT rate:
 Hotel (Hotel programmed key).
 DefaultValue.
 ExitTime.
 VAT rate.
 Validate.
5.11 Client record screens
This feature is used to programme the order in which the six consultation screens most frequently used
during check-in appear (maximum of six from eight).
Note: the consultation screens not selected remain available until the end of check-in.
 Hotel (Hotel programmed key).
 DefaultValue.
 Use one of the following:
1. CheckIn
2. Move the navigation key to the left or right. (to move to field to be modified).
Choice.
Validate.