Alcatel-Lucent 8039 - Room Status Configuration

8AL90302ENAAed01
24 /26
6.4 Room status configuration
This feature is used to specify whether all rooms or only those taken can be switched manually or
automatically (at a programmed time) to 'not cleaned' status:
Rooms:
 Hotel (Hotel programmed key).
 Status.
 Global.
 Rooms (consecutive presses).
 Validate.
This feature is used to specify which are the rooms concerned by the switch to the 'to clean' status (all
rooms or only rooms taken).
Manual or automatic switch:
This feature is used to specify if the rooms concerned (on the 'rooms' menu) switch automatically or
manually into 'not cleaned' status.
 Hotel (Hotel programmed key).
 Status.
 Global.
o Now: manual switch.
o Time: automatic switch.
o Clear
In the table below, you can see the codes you have assigned to different problems indicated in room
status:
ROOM STATUS
YOUR CODE
forward internal and outside calls
88
Room cleaned
0
Room not cleaned
1
Problem of:
Problem of:
Problem of:
Problem of:
Problem of:
Problem of:
Problem of:
Problem of:
Cancelling the problem
000