User Manual
8AL91432ENAAed01 41 /73
2.46 Send a voice message copy
• Access the messaging portal.
• Press the softkey associated with the voice message feature: Voice msg.
• Enter your password (if required) and apply.
• Select the tab to consult.
• Using the up and down navigation keys, select the voice message you want to send.
• Select the message to send.
• Sendcopy
• Enter the destination number.
•
• Sendmessage
When sending a copy of the message, you can also record a comment to join to the copy.
• Record
• Start recording the comment.
• Stop
•
2.47 Sending a recorded message to a number or a distribution list
• Access the messaging portal.
• Press the softkey associated with the voice message feature: Voice msg.
• Enter your password (if required) and apply.
• Press the associated softkey.
• Use one of the following:
o Enter the number of the recipient or select a destination list.
o Enter the name of the recipient using the alphapad.
•
• Record
• Start recording the comment.
• Stop
• Send the message.
2.48 Receiving supervised call ringing
To receive the special ringing for calls to another number:
• Supervised call ringing programmed key. The programmed key has to be configured by the
system.
• Same key to cancel.
2.49 Answering the general bell
When the operator is absent, outside calls to the operator are indicated by a general bell. To answer:
• Reach the 'Menu' page.
• Pickup Generalbell
To Next Page
Loading...
