58/91
Do more with your desk phone
: this icon indicates SSIDs already saved in the phone.
or
Detail
Display all information about the corresponding wireless network,
such as the SSID, encryption mode, channel, signal strength.
Connect
Connect the phone to the selected wireless network.
If the wireless network is not already saved, enter the network security
key (passphrase) if requested. Use the alpha-numeric keyboard key to
switch between the numeric and alphabetic keyboard.
: during connection establishment, the Wi-Fi icon is displayed (1 to 4
waves).
If the connection is successful, a pop-up is displayed on your phone.
A specific icon is displayed in the status bar when you are connected to
a Wi-Fi access point: . The SSID and authentication is automatically
saved if it has not already been saved.
To switch back to the wired network, unplug the Wi-Fi dongle, connect the Ethernet cable and
restart the
desk phone.
4.3.2 Manage wireless network
The Wi-Fi manager allows you manage all saved wireless network configurations on your
phone. If the wireless network is available and saved on your phone, the connection is
automatic. If there are several networks available, the best signal will be used.
4.3.2.1 Open the Wi-Fi manager
The phone is in idle state.
Menu
Press the Menu soft key to access the Main Menu.
Advanced Setting
Use up-down and 'ok' navigation keys to select:
Advanced Setting
.
The administrator password of the phone is requested.
Enter the administrator password.
Validate.
Wi-Fi →
Wi-Fi
Manager
Use up-down and 'ok' navigation keys to select:
Wi-Fi Manager
.
To Next Page
Loading...
