67/91
Programming your telephone
The system can be configured to prevent call pick-up on some telephones.
•
XML Browser:
display an XML page.
o
Label:
enter the label of the key, displayed on the home page.
o
Value:
enter the URL of the XML page.
•
Phone Lock:
lock/unlock the phone.
o
Label:
enter the label of the key, displayed on the home page.
These keys can be also configured by the administrator via Web Management or via the
configuration file.
Led behavior may differ depending on the system configuration. For more information,
contact your installer or administrator.
5.7 Call pick-up
You hear a telephone ringing in an office where no-one can answer. If authorised, you can
answer the call on your own telephone.
Before using this feature, you have to programmed a key on the home page with the following
feature:
GrpPickup, DirectPickup
.
• If the telephone ringing is in your own pick-up group: select the programmed key:
GrpPickup
.
• If the telephone ringing is not in your pick-up group: select the programmed key:
DirectPickup
.
5.8 Install a USB accessory (Headset, Handsfree, Loudspeaker)
• Connect the accessory to the USB connector.
• When you plug the accessory in the USB port, the USB accessory is automatically
detected. If an another accessory is already connected with the same function (USB and
jack), a pop-up will ask you to select your preferred accessory to use for this function.
If you are using an external hands-free device, configure the audio for this purpose:
The phone is in idle state.
Menu
Press the Menu soft key to access the Main Menu.
Basic Setting
Use up-down and 'ok' navigation keys to select:
Basic Setting.
Sound
Use up-down and 'ok' navigation keys to select:
Sound.
External Device
Use up-down and 'ok' navigation keys to select:
External Device
.
To Next Page
Loading...
