Alcatel-Lucent M5 - Page 62

62/91
8AL90382ENAA ed03
Programming your telephone
Ringing
Use up-down and 'ok' navigation keys to select: Ringing.
Ringing mode Use up-down and 'ok' navigation keys to select: Ring mode .
Switch or
• Normal ringing
A normal ring signals an incoming call.
• Progressive ringing
A progressive ring signals an incoming call.
Switch or
Enable or disable the silent mode: Silent mode.
The phone no longer rings. The LED flashes to signal an incoming call.
or Save
Validate your choice.
To end the settings.
5.1.4 Configuring discreet mode (beep)
The phone is in idle state.
Menu Press the Menu soft key to access the Main Menu.
Basic Setting Use up-down and 'ok' navigation keys to select: Basic Setting .
Sound Use up-down and 'ok' navigation keys to select: Sound.
Ringing
Use up-down and 'ok' navigation keys to select: Ringing.
Beep Use up-down and 'ok' navigation keys to select: Beep .
Switch or
• 0 Beep
A normal ring signals an incoming call.
• 1 Beep
A beep followed by the ring signals an incoming call.
• Beep
Three beeps followed by the ring signals an incoming call.
or Save
Validate your choice.
To end the settings.
5.1.5 Seat mode
Your desk phone supports the seat mode. The seat mode lets your administrator switch the
ringing onto the loudspeaker, the headset or both. This feature is configurable from the Web
Management. Contact your administrator for more information.