EasyManuals Logo

Alcatel-Lucent OmniSwitch 6400-24 User Manual

Alcatel-Lucent OmniSwitch 6400-24
150 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #145 background imageLoading...
Page #145 background image
Regulatory Compliance and Safety Information Translated Safety Warnings
OmniSwitch 6400 Series Hardware Users Guide August 2008 page A-11
Power Disconnection Warning
Your switch is equipped with multiple power supplies. To reduce the risk of electrical shock, be sure to
disconnect all power connections before servicing or moving the unit.
Français: Il se peut que cette unité soit équipée de plusieurs raccordements d'alimentation. Pour
supprimer tout courant électrique de l'unité, tous les cordons d'alimentation doivent être débranchés.
Deutsch: Hinweise zur Spannungsfreischaltung
Ihr Gerät ist mit mehreren Netzteilen ausgerüstet. Um die Gefahr des elektrischen Schlages zu verringern,
stellen sie sicher, daß alle Netzverbindungen getrennt sind bevor das Gerät gewartet oder bewegt wird.
Español: Antes de empezar a trabajar con un sistema, asegurese que el interruptor está cerrado y el cable
eléctrico desconectado.
Proper Earthing Requirement Warning
To avoid shock hazard:
The power cord must be connected to a properly wired and earth receptacle.
Any equipment to which this product will attached must also be connected to properly wired recep-
tacles.
Use 12AWG conductor for ground leads connecting the frame to ground and DC return.
Cleaning and dressing of grounding points during installation is strongly recommended. Also, do
not forget the antioxidant.
To ground the equipment properly, connect a Panduit Corporation UL listed Lug, P/N: LCD8-10A-
L to the two threaded holes located on the rear using 8AWG copper conducters. Use Panduit Corpo-
ration, P/N: CT-940CH for crimping.
Français:
Pour éviter tout risque de choc électrique:
Ne jamais rendre inopérant le conducteur de masse ni utiliser l'équipement sans un conducteur de
masse adéquatement installé.
En cas de doute sur la mise à la masse appropriée disponible, s'adresser à l'organisme responsable de
la sécurité électrique ou à un électricien.
Deutsch: Hinweise zur geforderten Erdung des Gerätes
Aus Sicherheitsgründen:
darf das Netzkabel nur an eine Schutzkontaktsteckdose angeschloossen werden.
dürfen für den Anschluß anderer Geräte, welche mit diesem Gerät verbunden sind, auch nur Schutz-
kontaktsteckdosen verwendet werden.
Español:
Para evitar peligro de descargas:
Para evitar peligro de descargas asegurese de que el cable de alimentación está conectado a una
toma de alimentación adecuadamente cableada y con toma de tierra.
Cualquier otro equipo a cual se conecte este producto también debe estar conectado a tomas de
alimentación adecuadamente cableadas.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Alcatel-Lucent OmniSwitch 6400-24 and is the answer not in the manual?

Alcatel-Lucent OmniSwitch 6400-24 Specifications

General IconGeneral
ModelOmniSwitch 6400-24
Product TypeSwitch
Port Count24
Ports24 x 10/100/1000Base-T
Switching Capacity128 Gbps
Forwarding Rate95.2 Mpps
Jumbo Frame SupportYes
PoENo
Operating Temperature0°C to 45°C (32°F to 113°F)
MAC Address Table Size16000 entries
ManagementCLI, SNMP
FeaturesVLAN, QoS
Power SupplyInternal
Dimensions (W x D x H)440 x 44 x 44 mm
Storage Temperature-40 to 70 °C
Operating Humidity10% to 90% non-condensing
Storage Humidity5% to 95% non-condensing

Related product manuals