Viewing PoE Power Supply Status Managing Power over Ethernet (PoE)
page 5-4 OmniSwitch 6400 Series Hardware Users Guide August 2008
Viewing PoE Power Supply Status
To view the current status of power supplies installed in the backup power supply, use the show power
command, as shown below:
-> show power
Slot PS Wattage Type Status Location
----+----+---------+------+-----------+----------
1 1 360 AC UP External
1 2 360 AC UP External
2 1 510 AC UP External
2 2 -- -- -- --
3 1 360 AC UP External
3 2 360 AC DOWN External
Status Display Output:
UP = Power Supply operational.
DOWN = Power Supply not operational.
-- = Power Supply not present.
To Next Page
Loading...
