In This Chapter Managing OmniSwitch 6400 Series Stacks
page 6-2 OmniSwitch 6400 Series Hardware Users Guide August 2008
In This Chapter
This chapter provides information on OmniSwitch 6400 Series switches configured to operate as a single
virtual chassis. Topics described in the chapter include:
• OmniSwitch 6400 Series stack overview on page 6-3.
• Roles within the stack on page 6-3.
• Stack cabling on page 6-16.
• Slot numbering on page 6-18.
• Hot-Swapping modules in a stack on page 6-23.
• Reloading switches on page 6-25.
• Changing the secondary module to primary on page 6-33.
• Synchronizing switches in a stack on page 6-35.
• Monitoring the stack on page 6-36.
Note. You can also manage and monitor OmniSwitch 6400 Series stacks through WebView,
Alcatel-Lucent’s embedded web-based device management application. WebView is an interactive and
easy-to-use GUI that can be launched from OmniVista or a web browser. Please refer to WebView’s
online documentation for more information.
To Next Page
Loading...
