In This Chapter Managing Power over Ethernet (PoE)
page 6-2 OmniSwitch 6450 Hardware Users Guide September 2015
In This Chapter
This chapter provides specifications and descriptions of hardware and software used to provide PoE for
attached devices.
The chapter also provides information on configuring PoE settings on the switch through the Command
Line Interface (CLI). CLI commands are used in the configuration examples; for more details about the
syntax of commands, see the OmniSwitch 6250/6450 CLI Reference Guide. Topics and configuration
procedures described in this chapter include:
• Power over Ethernet Specifications on page 6-3
• Viewing Power Status on page 6-4
• Configuring Power over Ethernet Parameters on page 6-4
• Understanding Priority Disconnect on page 6-8
• Monitoring Power over Ethernet via the CLI on page 6-10
Note. You can also monitor all chassis components and manage many chassis features, including Power
over Ethernet, with WebView, Alcatel-Lucent’s embedded web-based device management application.
WebView is an interactive and easy-to-use GUI that can be launched from the OmniVista or a web
browser. Please refer to WebView’s Online Documentation for more information.
To Next Page
Loading...
