Alcatel-Lucent OmniSwitch OS6450-P10 - Omniswitch 6450-P10; Chassis Features; Front Panel

OmniSwitch 6450 Chassis and Hardware Components OmniSwitch 6450-P10
OmniSwitch 6450 Hardware Users Guide September 2015 page 3-5
OmniSwitch 6450-P10
Chassis Features
Front Panel
OmniSwitch 6450-P10 Front Panel
Refer to “OmniSwitch 6450 LED Status” on page 3-32 for LED status information.
System status LEDs Internal AC Power Supply
(8) Non-combo 10/100/1000Base-T PoE ports Console port (RJ-45)
(2) Non-combo 100/1000BaseX ports USB port (USB 2.0)
(2) Combo 10/100/1000Base-T or
100/1000BaseX ports
Fanless design
Item Description
A
System Status LEDs
Provides status on hardware, software, and power.
B
Console Port
RS-232 console port with an RJ-45 connector. Provides access to the CLI for configuration and
management.
C
10/100/1000BaseT RJ-45 PoE Ports
10/100/1000BaseT non-combo ports. Odd-numbered ports are on top row, even-numbered ports
are on bottom row.
D
10/100/1000BaseT or 100/1000BaseX SFP Combo Ports
Two 10/100/1000BaseT or SFP combo ports for various supported SFP transceivers.
E
SFP Uplink Ports
Two SFP ports to be used for uplinks.
F
USB Port
High speed USB 2.0 port.
G
Push Button
When pushed, all LEDs will turn off and the LED of the Stack ID will remain lit. (Not currently
supported. Functionality scheduled for future release.)
OS6450-P10
9
USB12/STK B11/STK B109
Console
OK PRI PWR STK
12 34 56 78 9 10 11 12
A
B
C
D
E
F
G