Alcatel-Lucent OmniSwitch OS6450-P10 - Omniswitch 6450-P48; Chassis Features; Front Panel

OmniSwitch 6450-P48 OmniSwitch 6450 Chassis and Hardware Components
page 3-22 OmniSwitch 6450 Hardware Users Guide September 2015
OmniSwitch 6450-P48
Chassis Features
Front Panel
OmniSwitch 6450-P48 Front Panel
Refer to “OmniSwitch 6450 LED Status” on page 3-32 for LED status information.
System status LEDs Backup Power Supply (BPS) Connector
(48) Non-combo 10/100/1000Base-T PoE ports Console port (RJ-45)
(2) Non-combo SFP/SFP+ ports USB port (USB 2.0)
Expansion Module Stacking LED
Internal AC Power Supply
Item Description
A
Stacking LED
Displays the chassis stack ID.
B
Console Port
RS-232 console port with an RJ-45 connector. Provides access to the CLI for configuration and
management.
C
System Status LEDs
Provides status on hardware, software, and power.
D
10/100/1000BaseT RJ-45 PoE Ports
10/100/1000BaseT non-combo ports. Odd-numbered ports are on top row, even-numbered ports
are on bottom row.
E
Rear Status LEDs
Displays link status for expansion module ports.
F
USB Port
High speed USB 2.0 port.
G
SFP/SFP+ Ports
Two SFP/SFP+ ports to be used for uplinks.
CB
A
D
E
F
G