OmniSwitch 6450 Hardware Users Guide September 2015 page 4-1
4 Mounting
OmniSwitch 6450 Switches
This chapter covers different mounting and installation options. OmniSwitch 6450 switches may be either
table- or rack-mounted. 24- and 48-port OmniSwitch 6450 switches are rack mounted using factory-
installed rack mount flanges. 10-port (1/2 width) switches may be rack mounted using available rack
mounting kits. Refer to “Available 10-Port Rack-Mounting Kits” on page 4-5 for details.
Anti-Static Warning. Before handling any components, free yourself of static by wearing a grounding
strap or by grounding yourself properly. Static discharge can damage the switch and related components.
To Next Page
Loading...
