SFP MSA Specification Small Form-Factor Pluggables (SFPs)
page 1-2 OmniSwitch Transceivers Guide April 2011
SFP MSA Specification
The Small Form-Factor Pluggable (SFP) MSA (Multi Source Agreement) is a specification for a common
interface for optical modular transceivers. The SFP connector consists of a 20-pin receptacle and an SFP
housing cage. The connector provides the interface for the hot pluggable SFP module. Each SFP module
contains a serial interface to provide identification information that describes the SFP capabilities, stand
interfaces, manufacturer and other information.
For information on installing SFPs, refer to the documentation included with the transceiver.
Small Form Factor Pluggable (SFP)
This diagram is a representation
only; the physical appearance of the
actual module may vary slightly.
To Next Page
Loading...
