Alcatel-Lucent SFP - Omniswitch 9000 E Series

SFP Compatibility Matrix OmniSwitch 9000E Series
OmniSwitch Transceivers Guide April 2011 page 4-35
OmniSwitch 9000E Series
The following table shows the Ethernet transceiver configurations and minimum release required for
support on the OmniSwitch 9000E Series:
1. Speed must be hardcoded to 1000 Mbits for support on OS9-XNI-U12E.
2. Supports 10/100/1000 Mbits.
SFP OS9-GNI-U24E OS9-XNI-U12E
SFP-GIG-SX
1
6.4.1 6.4.4
SFP-GIG-LX
1
6.4.1 6.4.4
SFP-GIG-LH40
1
6.4.1 6.4.4
SFP-GIG-LH70
1
6.4.1 6.4.4
SFP-GIG-EXTND
1
6.4.1 6.4.4
SFP-GIG-CWD
1
6.4.1 6.4.4
SFP-GIG-T
1,2
6.4.1 6.4.4
SFP-DUAL-MM 6.4.1 -
SFP-DUAL-SM10 6.4.1 -
SFP-100-BX20LT Not supported -
SFP-100-BX20NU Not supported -
SFP-100-BXLC-D Not supported -
SFP-100-BXLC-U Not supported -
SFP-100-LC-MM Not supported -
SFP-100-LC-SM15 Not supported -
SFP-100-LC-SM40 Not supported -
SFP-GIG-BX-D 6.4.1 -
SFP-GIG-BX-U 6.4.1 -
SFP-10G-SR -6.4.3
SFP-10G-LR -6.4.3
SFP-10G-ER - 6.4.3
SFP-10G-LRM -6.4.3
SFP-10G-C -6.4.3