Alcatel-Lucent SFP - Omniswitch 6400 Series

SFP Compatibility Matrix OmniSwitch 6400 Series
OmniSwitch Transceivers Guide April 2011 page 4-39
OmniSwitch 6400 Series
The following table shows the Ethernet transceiver configurations and the minimum release required for
support on the OmniSwitch 6400:
1. SFP-GIG-T supports 10/100/1000 Mbits on non-combo ports only.
2. SFP-GIG-T is not supported on OS6400 combo ports.
SFP OS6400
(All ports/All models)
SFP-GIG-SX 6.3.3
SFP-GIG-LX 6.3.3
SFP-GIG-LH40 6.3.3
SFP-GIG-LH70 6.3.3
SFP-GIG-EXTND 6.3.3
SFP-GIG-CWD Not supported
SFP-GIG-T
1,2
6.3.3
SFP-DUAL-MM Not supported
SFP-DUAL-SM10 Not supported
SFP-100-BX20LT 6.3.3
SFP-100-BX20NU 6.3.3
SFP-100-BXLC-D 6.4.2
SFP-100-BXLC-U 6.4.2
SFP-100-LC-MM 6.3.3
SFP-100-LC-SM15 6.3.3
SFP-100-LC-SM40 6.3.3
SFP-GIG-BX-D 6.3.3
SFP-GIG-BX-U 6.3.3