OmniSwitch Transceivers Guide April 2011 page 4-34
4 SFP Compatibility Matrix
OmniSwitch 9000 Series
The following table shows the Ethernet transceiver configurations and minimum release required for
support on the OmniSwitch 9000 Series:
1. Supports 10/100/1000 Mbits.
SFP OS9-GNI-C20L OS9-GNI-U24
SFP-GIG-SX 6.1.5 All
SFP-GIG-LX 6.1.5 All
SFP-GIG-LH40 6.1.5 All
SFP-GIG-LH70 6.1.5 All
SFP-GIG-EXTND 6.1.5 All
SFP-GIG-CWD 6.1.5 All
SFP-GIG-T
1
6.1.5 6.1.3
SFP-DUAL-MM 6.1.5 6.1.3
SFP-DUAL-SM10 6.1.5 6.1.3
SFP-100-BX20LT 6.1.5 Not supported
SFP-100-BX20NU 6.1.5 Not supported
SFP-100-BXLC-D 6.1.5 Not supported
SFP-100-BXLC-U 6.1.5 Not supported
SFP-100-LC-MM 6.1.5 Not supported
SFP-100-LC-SM15 6.1.5 Not supported
SFP-100-LC-SM40 6.1.5 Not supported
SFP-GIG-BX-D 6.3.1 6.3.1
SFP-GIG-BX-U 6.3.1 6.3.1
To Next Page
Loading...
