Alcatel-Lucent SFP - Omniswitch 6855 Series

OmniSwitch 6855 Series SFP Compatibility Matrix
page 4-36 OmniSwitch Transceivers Guide April 2011
OmniSwitch 6855 Series
The following table shows the Ethernet transceiver configurations and the minimum release required for
support on the OmniSwitch 6855:
1. Not supported on combo ports.
2. Supports maximum of 4 Copper SFPs on OS6855-U10.
3. Supports maximum of 8 Copper SFPs on OS6855-U24.
4. Supports maximum of 22 Copper SFPs on OS6855-U24X.
5. Supported on OS6855-U24X only.
6. Does not support industrial temperature ranges.
* 10/100/1000 Mbps SFP transceivers are not supported on 10-Gigabit SFP+ ports.
SFP OS6855
iSFP-GIG-SX 6.3.2
iSFP-GIG-LX 6.3.2
iSFP-GIG-LH40 6.3.2
iSFP-GIG-LH70 6.3.2
iSFP-100-BX-D
1
6.3.2
iSFP-100-BX-U
1
6.3.2
iSFP-100-BXLC-D
1
6.4.2
iSFP-100-BXLC-U
1
6.4.2
iSFP-100-MM
1
6.3.2
iSFP-100-SM15
1
6.3.2
iSFP-100-SM40
1
6.3.2
iSFP-GIG-T
1,2,3,4
6.4.2
iSFP-100-BX-D 6.4.3
iSFP-100-BX-U 6.4.3
iSFP-GIG-BX-D 6.4.2
iSFP-GIG-BX-U 6.4.2
iSFP-10G-LR
5
6.4.2
iSFP-10G-C
5
6.4.2
SFP-10G-SR
5,6
6.4.2
SFP-10G-ER
5,6
6.4.3
SFP-10G-LRM
5,6
6.4.3
All other non-industrial SFPs Not Supported