SFP Compatibility Matrix OmniSwitch 6850 Series
OmniSwitch Transceivers Guide April 2011 page 4-37
OmniSwitch 6850 Series
The following table shows the Ethernet transceiver configurations and the minimum release required for
support on the OmniSwitch 6850:
1. Release 6.3.1.R02 added support for the SFP-GIG-T at 10/100/1000 Mbits on OS6850-U24X non-
combo ports only.
2. SFP-GIG-T is not supported on OS6850 combo ports.
SFP OS6850 Combo Ports
(Excluding U24X)
OS6850-U24X
SFP-GIG-SX All 6.1.3
SFP-GIG-LX All 6.1.3
SFP-GIG-LH40 All 6.1.3
SFP-GIG-LH70 All 6.1.3
SFP-GIG-EXTND All 6.1.3
SFP-GIG-CWD All 6.1.3
SFP-GIG-T
1,2
Not Supported 6.1.3
SFP-DUAL-MM 6.3.1 6.1.3
SFP-DUAL-SM10 6.3.1 6.1.3
SFP-100-BX20LT Not supported 6.1.3
SFP-100-BX20NU Not supported 6.1.3
SFP-100-BXLC-D Not supported 6.4.2
SFP-100-BXLC-U Not supported 6.4.2
SFP-100-LC-MM Not supported 6.1.3
SFP-100-LC-SM15 Not supported 6.1.3
SFP-100-LC-SM40 Not supported 6.1.3
SFP-GIG-BX-D 6.3.1 6.3.1
SFP-GIG-BX-U 6.3.1 6.3.1