10-Gigabit Small Form Factor Pluggables (XFPs) 10-Gigabit Ethernet Transceivers
OmniSwitch Transceivers Guide April 2011 page 3-33
10-Gigabit Ethernet Transceivers (cont.)
XFP-10G-CX4
10-Gigabit XFP Copper Transceiver.
Connector Type CX4
Standards Supported 802.3ak, XFP MSA
Connections supported 10GBase-CX4
Cable Type Standard CX4 copper cables compliant with IEEE 802.3ak
Transmission Distance
∼15 m
Digital Diagnostic Monitoring Not Supported
Notes InfiniBand type cables not supported.
XFP-10G-DWDM
Dense Wavelength Division Multiplexing (DWDM), 100GHz ITU Grid, C-Band optical transceiver supporting
single-mode fiber over various wavelengths. DWDMs are hot-pluggable and are available for long-reach appli-
cations.
Connector type LC
Standards Supported XFP MSA
Fiber Type SMF
Wavelength Channel 35 - 1549.32
Channel 37 - 1547.72
Channel 38 - 1546.92
Channel 39 - 1546.12
Channel 59 - 1530.33
Optical Power Output -3 to +3 dBm
Receiver Sensitivity -23 or -27 dBm
Transmission Distance
∼ 80 km
Power consumption <3.5W
Operating Temperature -5 ºC to 70 ºC
Digital Diagnostic Monitoring Not Supported
Notes The transmitter becomes operational within 60 seconds of power-up.
This is due to the time required for the transceiver to reach its optimum
operating temperature.
To Next Page
Loading...
