15 16
Installing and removing the MicroSD card
To release the microSD card holder, slide it in the direction of the arrow and lift it.
Then insert the microSD card with the golden contact downward. Finally, turn down
the microSD holder and slide it in the opposite direction to lock it.
Tip: MicroSD card may contain user manual and some third party applications.
Installing or removing the battery
Insert and click the battery into place, then close the phone cover. ▪
Unclip the cover, then remove the battery. ▪
Charging the battery
Standard charger
Connect the battery charger to your phone and mains socket respectively.
Charging may take about 20 minutes to start if the battery is flat.
▪
Be careful not to force the plug into the socket. ▪
Make sure the battery is correctly inserted before connecting the charger. ▪
The mains socket must be near to the phone and easily accessible (avoid electric ▪
extension cables).
When using your telephone for the first time, charge the battery fully (approximately
▪
4 hours).
You are advised to fully charge the battery (
).
Tip: To reduce power consumption and energy waste, when battery is fully charged,
disconnect your charger from the plug; switch off Wi-Fi, GPS, Bluetooth or
background-running applications when not in use; reduce the backlight time,
etc.
To Next Page
Loading...
Need help?
General
