Alcatel Smart Tab 7 - Getting Connected; Wi-Fi; Connecting to a Bluetooth Device

51 52
6
Getting connected ..................
To connect to the internet with this tablet, you can use
Wi-Fi.
6.1 Wi-Fi
You can connect to the internet when your tablet is
within range of a wireless network. Wi-Fi can be used
on your tablet.
To turn Wi-Fi on and connect to a wireless network
• Touch Settings > Network & internet > Wi-Fi.
• Turn on
.
• Once Wi-Fi is turned on, detected Wi-Fi networks
are listed.
• Touch a Wi-Fi network to connect to it. If the
network you selected is secured, you are required
to enter a password or other credentials (you may
contact the network operator for details). When
finished, touch CONNECT.
To add a Wi-Fi network
When Wi-Fi is on, you may add new Wi-Fi networks
according to your preference.
• Touch Settings > Network & internet > Wi-Fi.
• Touch Add network.
• Enter the name of the network and any required
network information.
• Touch SAVE.
To forget a Wi-Fi network
The following steps prevent automatic connections to
networks which you no longer wish to use.
• Turn on Wi-Fi, if it’s not already on.
• On the Wi-Fi screen, touch the name of the saved
network.
• Touch FORGET in the dialog that opens.
6.2 Connecting to a Bluetooth device
(1)
Bluetooth is a short-range wireless communication
technology that you can use to exchange data, or
connect to other Bluetooth devices for various uses.
To turn on Bluetooth
• Touch Settings > Connected devices > Connection
preferences > Bluetooth.
• Turn on Bluetooth
.
(1)
You are recommended to use alcatel Bluetooth headsets,
which have been tested and proved compatible with your
tablet. You can go to www.alcatelmobile.com for more
information about the alcatel Bluetooth headset.