Alcatel Smart Tab 7 - Connecting to a Computer via USB; Connecting to Virtual Private Networks

53 54
Your device name and other available devices will
appear on screen.
To rename your device
• Touch Settings > Connected devices > Connection
preferences > Bluetooth.
• Touch device name.
• Enter a name, and touch RENAME to confirm.
To pair/connect your tablet with a Bluetooth device
To exchange data with another device, you need to turn
Bluetooth on and pair your tablet with the Bluetooth
device with which you want to exchange data.
• Touch Settings > Connected devices > Connection
preferences > Bluetooth > Pair new device.
• Touch a Bluetooth device you want to pair your
tablet with in the list.
• In the dialog that pops up, touch PAIR to confirm.
• If the pairing is successful, your tablet will be
connected to the device.
To disconnect/unpair from a Bluetooth device
• Touch
beside the device you want to unpair.
• Touch FORGET to confirm.
6.3 Connecting to a computer via USB
With a USB cable, you can transfer media files and
other files between your tablet and a computer.
To connect your tablet to the computer
Use the USB cable that came with your tablet to
connect the device to a USB port on your computer. You
will receive a notification that the USB is connected.
Open the Notification panel and touch Charging the
device via USB, Then from the appeared dialogue,
choose the way in which you want to transfer files. By
default, Charge this device is selected.
6.4 Connecting to virtual private
networks
Virtual private networks (VPNs) allow you to connect
to the resources inside a secured local network from
outside that network. VPNs are commonly deployed
by corporations, schools, and other institutions so
that their users can access local network resources
when not inside that network, or when connected to a
wireless network.
To add a VPN
• Touch Settings > Network & internet > VPN and
then touch
.