118
Settings Menu
Press the Tool Button to access the Settings
Menu from the Main Menu. Lower level
functions can be accessed by from these
screens by pressing the buttons. NB: If a
function is not available its button is greyed
out.
Error Log
Press the Warning button to access the Error
Log from the Service Menu. The most recent
20 error messages are displayed. To verify an
error message, remove the system from the
12 V and 230 V supply. Wait 10 secs before
restoring 12 V and 230 V power to the system.
Reset
Press Reset to restore factory default settings,
and the Error Log will be cleared. NB: The
Main Menu will be set to 22 °C, Hot Water
Normal, 1 kW electric heating and gas heating.
Note: Using Reset to restore factory
default settings does not clear Installed
Accessories.
ALDE HEATING OPERATING INSTRUCTIONS
To Next Page
Loading...
Need help?
General
