ALDI FERREX 704518 - Adjusting the Parallel Guide; Hand Grip Position; Safety Lock Off Button

14
1200W Circular Saw
AFTER SALES SUPPORT
(toll free)
e-mail: info.aldi@positecgroup.com
1300 889 028
MODEL No.: PSC1856.A • 02/2021 • 704518
D1
D2 D3
Adjusting the parallel guide
There is a cutting guide notch on the front of the base
plate (7) for use with the parallel guide (5) (Fig. E) .
For straight cuts, use the 0º guide mark (16) to align
with your parallel guide scale.
For a 45º bevel cut, use the 45º guide mark (17) to
align with your parallel guide scale.
Securely clamp the parallel guide (5). Always make a
trial cut to check the setting.
Hand grip position
Always hold your saw rmly with both hands
when operating, with one hand controlling the
on/o trigger and the other hand on the front
handle for support and pressure. (Fig. F).
Safety Lock O button
This circular saw has a lock o button to prevent
accidental starting. Depress lock o button (13)
then the on/o trigger (12) and then release the
lock o button (13). Your switch is now on. To
switch o just release the on/o trigger (12) (Fig. G).
The blade may continue to rotate after switching
o. Wait until the machine comes to a complete
stop before setting down.
F
G
1
2
E
45
o
0
o