MODEL No.: PSC1856.A, PRODUCT No.: 704518
Pack contents / parts
Congratulations on the purchase of your FERREX® 1200W Circular Saw. When
you open your packaging, rst remove all items and check there are no parts
damaged or missing. If you nd anything wrong, do not operate the product
until the parts have been replaced or the fault has been rectied. Failure to
do so could result in serious personal injury.
First time users or inexperienced operators pay particular attention to
the operation of the 1200W Circular Saw, including details of starting and
stopping and correct use of the 1200W Circular Saw on pages 13-17, as well
as the maintenance instructions on pages 17-19.
Intended use of 1200W Circular Saw
NOTE: This product is for private domestic DIY use only. It is not suitable for
commercial or trade use.
This 1200W Circular Saw is used for lengthways and crossways cutting of
wood with straight cutting lines as well as bevel angles to 45° while resting
rmly on the work piece.
The 1200W Circular Saw is to be used only for its prescribed purpose. Any
other use is deemed to be a case of misuse.
Contents of carton
1 x 1200W Circular Saw
2 x 185*20mm*24T Blade
1 x Parallel Guide
1 x Wrench
1 x Dust Extraction Adapter
1 x 6mm hex Key
1 x Instruction manual
1 x Warranty Card & Certicate
2
WARNING! Please read and understand this instruction manual
before use and keep it for your future reference. Your product
should only be passed on together with this instruction manual.
To Next Page
Loading...
Need help?
General
