17
AFTER SALES SUPPORT
e-mail: info.aldi@positecgroup.com
1300 889 028
(toll free)
1200W Circular Saw
MODEL No.: PSC1856.A • 02/2021 • 704518
Maintenance
Changing a saw blade
WARNING! Before performing any maintenance or adjustment,
remove the plug from the socket.
WARNING! Wear protective gloves when mounting the saw
blade. Danger of injury when touching the saw blade.
WARNING! Only use saw blades compatible with this machine,
check details in these instructions.
WARNING! Do not use grinding discs as the cutting tool under
any circumstances.
-Removing
1) Use the supplied wrench (22) to x the spindle (Fig. L1).
2) Loosen the blade bolt (21) in an anti-clockwise direction with the 6mm
hex key (24) (Fig. L1). Remove the the blade bolt (21), the washer (20) and
the outer ange (19) (Fig. L2).
3) Tilt back the lower blade guard (8) and hold it rmly with the lower guard
lever (9). Remove the old saw blade (Fig. L3).
NOTE: If the corners of your pocket cut are not completely cut through, use a
jigsaw or hand saw to nish the corners.
K
To Next Page
Loading...
