23
AFTER SALES SUPPORT
e-mail: info.aldi@positecgroup.com
1300 889 028
(toll free)
1200W Circular Saw
MODEL No.: PSC1856.A • 02/2021 • 704518
Symptom Possible causes Solution
Product does
not start
1.1 Not connected to
power supply
1.2 Product not switched on.
1.3 Power cord or plug is
defective
1.4 Other electrical defect
to the product
1.1 Connect to power supply
1.2 Press the lock o button (13)
then on/o trigger (12).
1.3 Contact customer service
1.4 Contact customer service
Product does
not reach full
power
2.1 Extension cord not
suitable for operation with
the product
2.2 Power source has too
low voltage
2.1 Use a proper extension cord
2.2 Connect to another power
source
Vibration or
abnormal noise
3.1 Loose parts
3.2 Blade vibrating
3.3 Moving parts excessively
worn
3.1 Check to see that all knobs
and levers are securely tightened
including bevel lock knob (6),
depth lock knob (15) and parallel
guide lock knob (4).
3.2 Ensure that the blade bolt
(21) is securely tightened.
Check for any missing teeth on
the blade, and replace the
blade (18) if necessary.
3.3 Contact Customer Service for
further advice.
For further inquiries or issues associated with your 1200W Circular Saw, call
our Customer Service on 1300 889 028 or email us at
info.aldi@positecgroup.com
Troubleshooting
To Next Page
Loading...
