ALDI FERREX GSR2800 - Mounting Shredder Unit; Inserting Collection Container

2. Push the wheel axle
21
through the
axle holes in the base frame.
3. Slide an inner washer
18
, a wheel
2
and an outer washer
19
onto
each side of the axle.
4. Insert a splint
20
into the hole on both
ends of the axle.
5. Bend the ends of the splints around the
axle.
6. Place the wheel covers
1
onto the
wheels. There should be a clearly
audible click.
The base frame is assembled.
Installing the shredder assembly on the base frame
1. Position the shredder assembly
15
on
the base frame
16
.
When doing so, make sure that the
cutting drum
24
is positioned over
the opening in the plastic plate of the
base frame.
2. Screw the shredder assembly to the
base frame with the four 6x25mm
screws
27
.
The device is assembled.
Inserting the collection container
The device cannot be started without the collection container and the
safety switch being in the ON position!
2
18
21
20
19
3
15
16
27
Before first use
15