ALDI FERREX GSR2800 - Shredder Assembly Instructions; Assembling the Base Frame

NOTE!
Risk of damage!
If opening the packaging with a sharp knife or other pointed
objects, careless handling can damage the device.
- Therefore, be very careful when opening.
1. With both hands, lift the device out of the packaging.
2. Check that the delivery is complete (see chapter “Scope of delivery/device
components”).
3. Inspect the device and individual parts for damage. Do not operate a damaged
device; instead, contact the manufacturer via the service center listed on the
warranty card.
Assembly
Assembling the base frame
1. Install the two support feet
3
with
the 5x45mm screws
28
on the base
frame
16
.
1
3
28
16
Before first use
14