ALDI FERREX GSR2800 - Shredder Operation Guide; Understanding the Operating Panel

1. Unlock the safety switch
4
(OFF
position, down).
2. Insert the collection container
17
into
the base frame
16
.
The collection container can only be
inserted from the side with the support
feet.
3. Secure the collection container by
pulling the safety switch up (ON position,
up).
The collection container is inserted and
secured.
Operation
The device has a powerful electric motor with overload protection. A restart lockout
increases your safety. The cutting drum of the device works extremely quietly and
automatically pulls in the material.
The shredded material can be conveniently collected and transported with the
transparent collection container.
The robust base frame ensures stability and mobility.
Operating panel
5
910111213
Overload protection switch
If the motor is overloaded, the overload protection triggers. Press the overload
protection switch
12
to reset the device to the operating state.
Standby LED
The standby LED
13
is lit red if the following conditions are fulfilled:
■ The collection container
17
is inserted and secured (see section "Inserting
collection container").
■ The power supply is connected.
4
OFF
ON
16
4
17
Before
first use
16