ALDI Workzone titanium SHW196 User Manual

210cc 4 stroke Petrol High Pressure Washer
AFTER SALES SUPPORT
(toll free)MODEL No.: SHW196 • 06/2019 9885
e-mail: info.aldi@positecgroup.com
AUS
28
1300 889 028
AUS
Connecting with the water inlet hose (42) and water inlet filter
(43).
WARNING: Do not throw the water inlet filter (43) away. It
can be used repeatedly. Clean the filter after each use.
WARNING: Ensure there is enough water source being used
with the water inlet hose and filter. If the water source
becomes empty, turn off the pressure washer immediately.
NOTE: It is best to secure the water inlet hose to the water source (such
as the bucket or a pond with clean water, etc. ) so that the hose does
not come out of the water source being used
1) Insert the water inlet hose (42) into the water inlet of the pump (24).
A “click” sound will be heard if the hose is inserted in place. Pull the
inlet hose (42) to check if it is securely locked.
2) Apply the filter to the end of the water inlet hose by turning the
filter in a clockwise direction.
3) Place the filter into the water source.
M5
M4
M3

ALDI Workzone titanium SHW196 Specifications

General

Brand	ALDI
Model	Workzone titanium SHW196
Category	Pressure Washer
Language	English