210cc 4 stroke Petrol High Pressure Washer
AFTER SALES SUPPORT
(toll free) MODEL No.: SHW196 • 06/2019 9885
e-mail: info.aldi@positecgroup.com
AUS
43
1300 889 028
AUS
A weighted sound pressure L
pA
=92.4 dB(A )
K
pA
= 58.0 dB(A)
A weighted sound power L
wA
=108.7 dB(A)
K
wA
=58.0 dB(A)
Wear ear protection when sound pressure is over 80dB (A)
Vibration information
Typical weighted vibration : a
h
=4.82 m/s2 K=1.5 m/s2
WARNING: The vibration emission value during actual use of
the machine can differ from the declared value depending on
the ways in which the machine is used dependant on the following
examples and other variations on how the machine is used:
How the machine is used and the surfaces being cleaned.
The machine being in good condition and well maintained.
Using the correct accessory for the machine and ensuring it is sharp
suitable for the purpose.
The tightness of the grip on the handles and if any anti vibration
accessories are used.
The machine is being used as intended by its design and these instructions.
This machine may cause hand-arm vibration syndrome if its use
is not adequately managed.
WARNING: To be accurate, an estimation of exposure level in
the actual conditions of use should also take account of all parts
of the operating cycle such as the times when the machine is switched
off and when it is running idle but not actually doing the job. This may
significantly reduce the exposure level over the total working period.
Helping to minimise your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades.
Maintain this tool in accordance with these instructions and keep well
lubricated (where appropriate).
If the machine is to be used regularly then invest in anti vibration accessories.
Avoid using tools in temperatures of 10
o
C or less.
Plan your work schedule to spread any high vibration tool use across a
number of days.
Noise data
To Next Page
Loading...
Need help?
General
