ALDI Workzone titanium SHW196 User Manual

210cc 4 stroke Petrol High Pressure Washer
AFTER SALES SUPPORT
(toll free) MODEL No.: SHW196 • 06/2019 9885
e-mail: info.aldi@positecgroup.com
AUS
47
1300 889 028
AUS
WARNING: Remove the spark plug cable to prevent
accidental ignition of the engine before making any
repair.
SYMPTOM CAUSE SOLUTION
Engine does not
start
No Fuel Fill fuel Tank.
Throttle lever/fuel
valve/choke lever is
not in the correct
position.
Turn the throttle lever/
fuel valve/ choke lever
in the correct position.
Water pressure built
up in the machine.
Squeeze the trigger to
release the pressure.
Machine does not
reach high pressure
Diameter of garden
hose is too small.
Replace with a larger
garden hose.
Water supply is
restricted.
Check garden hose for
kinks, leaks or blockage.
Not enough inlet
water supply.
Turn water on full force.
Check garden hose for
kinks, leaks or blockage.
Water inlet filter
or filter behind the
water inlet of pump
fitting is clogged.
Remove filter and rinse
out in warm water.
Black detergent
nozzle is attached.
Remove black detergent
nozzle and attach high
pressure nozzle.
Throttle lever is not
in correct position.
Move throttle lever to
the correct position.
FAQ/Troubleshooting

ALDI Workzone titanium SHW196 Specifications

General

Brand	ALDI
Model	Workzone titanium SHW196
Category	Pressure Washer
Language	English